All Free Download Links » Engineering & Technology
Posted: April 28th, 2008, 9:01pm CEST by e-man
Myke Predko “Programming and Customizing the PIC Microcontroller” McGraw-Hill/TAB Electronics | 2007-09-25 | ISBN: 0071472878 | 1263 pages | PDF | 9 Mb
Tap into the latest advancements in PIC technology with the fully revamped Third Edition of McGraw-Hill’s Programming and Customizing the PIC Microcontroller. Long known as the subject’s definitive text, this indispensable volume comes [...]
Posted: April 27th, 2008, 4:00pm CEST by e-man
by M. Nakamura , S. Goto , N. Kyura , T. Zhang , Masatoshi Nakamura , Satoru Goto , Nobuhiro Kyura ” Mechatronic Servo System Control “Springer ; 1 edition | 2004 | English | ISBN: 3540210962 | 195 pages | PDF | 6.37 MB
This monograph presents the fundamentals as well as the application techniques [...]
Posted: April 27th, 2008, 3:57pm CEST by e-man
Kwang J. Kim , Satoshi Tadokoro ” Electroactive Polymers for Robotic Applications: Artificial Muscles and Sensors “Springer ; 1 edition | 2007 | English | ISBN: 184628371X | 281 pages | PDF | 4.81 MB
Electroactive polymers (EAPs) respond to electrical stimulation with large deformations. They are dynamic actuators which have attracted attention from an interdisciplinary [...]
Posted: April 27th, 2008, 2:41am CEST by e-man
Mohamed Gad-el-Hak ” MEMS: Applications (Mechanical Engineering) “CRC ; 2 edition | 2005 | English | ISBN: 0849391393 | 568 pages | 25.4 MB
As our knowledge of microelectromechanical systems (MEMS) continues to grow, so does The MEMS Handbook. The field has changed so much that this Second Edition is now available in three volumes. Individually, [...]
Posted: April 27th, 2008, 2:40am CEST by e-man
Roubik Gregorian “Introduction to CMOS OP-AMPs and Comparators” Wiley-Interscience | 1999-02-12 | ISBN: 0471317780 | 360 pages | PDF | 8,6 Mb
A step-by-step guide to the design and analysis of CMOS operational amplifiers and comparatorsThis volume is a comprehensive text that offers a detailed treatment of the analysis and design principles of two of the [...]
Posted: April 27th, 2008, 2:36am CEST by e-man
United States Gypsum USG Corporation “Gypsum Construction Handbook, Centennial Edition 2000″ United States Gypsum USG Corporation | 2000-01-01 | ISBN: 0963686224 | 536 pages | PDF | 13,7 Mb
This guide is highly recommended for its timesaving, lower-cost methods of installation. Provides a thorough coverage of proficient construction procedures for gypsum, drywall, veneer plaster, cement board, [...]
Posted: April 27th, 2008, 2:35am CEST by e-man
Biao Huang, Ramesh Kadali “Dynamic Modeling, Predictive Control and Performance Monitoring: A Data-driven Subspace Approach” Springer | 2008-04-10 | ISBN: 1848002327 | 242 pages | PDF | 2,6 Mb
A typical design procedure for model predictive control or control performance monitoring consists of: identification of a parametric or nonparametric model; derivation of the output predictor from [...]
Posted: April 27th, 2008, 2:33am CEST by e-man
Shengyuan Xu, James Lam “Robust Control and Filtering of Singular Systems” Springer | 2006-06-15 | ISBN: 3540327975 | 234 pages | PDF | 2 Mb
Singular systems have been widely studied in the past two decades due to their extensive applications in modelling and control of electrical circuits, power systems, economics and other areas. Interest has [...]
Posted: April 27th, 2008, 2:26am CEST by e-man
Rex Miller, Mark Richard Miller, Joseph P., Sr. Almond “Audel Plumbers Pocket Manual” Wiley | 2004-09-03 | ISBN: 0764569953 | 464 pages | PDF | 4,2 Mb
Here’s the real plumber’s friend This fully revised guide gives you plumbing essentials, illustrations, tips, shortcuts – the lowdown on brazing, soldering, pipe fittings, commercial water coolers, automatic bathroom [...]
Posted: April 27th, 2008, 2:23am CEST by e-man
Ernst Fiala: Mensch und Fahrzeug. Fahrzeugführung und das sanfte Technik (ATZ-MTZ Fachbuch) German | PDF | 291 Seiten | Vieweg+Teubner; Auflage: 1 (Mai 2006) | ISBN 3834800163 | 10 MB
Die Interaktion von Mensch und Maschine sowie die damit entstehenden Probleme stehen im Mittelpunkt des Buches. Lehrbuchartig und mit manchem vereinfachenden Blick in die Vergangenheit [...]
Posted: April 27th, 2008, 2:23am CEST by e-man
Langeheinecke: Thermodynamik für Ingenieure. Ein Lehr- und Arbeitsbuch für das Studium German | PDF | 357 Seiten | Vieweg; Auflage: 6.(Mai 2006) | ISBN 3834801038 | 6,5 MB
Die Technische Thermodynamik gehört zur Basis der Ingenieurwissenschaften. Die zum Verstehen der realen thermischen Prozesse erforderlichen Kenntnisse werden mit ausführlichen Texten, vielen bildlichen Darstellungen und durchgerechneten Beispielen [...]
Posted: April 27th, 2008, 2:23am CEST by e-man
Meywerk, Martin: CAE-Methoden in der FahrzeugtechnikGerman | PDF | 395 Seiten | Springer, 2007 | ISBN 9783540498674 | 8 MB
Das Buch führt in die CAE-Methoden ein und behandelt die spezifischen Fragestellungen von CAE-Methoden in der Fahrzeugtechnik. Zunächst werden Grundlagen zur Modellbildung und zu Diskretisierungsverfahren für partielle Differentialgleichungen dargestellt. Die anschließenden Kapitel beschreiben die Inhalte [...]
Posted: April 27th, 2008, 2:21am CEST by e-man
Gerd Litfin: Technische Optik in der Praxis German | PDF | 278 Seiten | Springer, Auflage: 3 (September 2004) | ISBN 354021884X | 2,5 MB
“…Einem hochkarätigen Autorenteam…gelang es nun, ein hervorragendes Fachbuch…zu verfassen…Zum guten Verständnis tragen zahlreiche übersichtlich gestaltete Abbildungen bei…der Leser…lernt…gezielt praktische Vorgehensweisen und die richtige Nutzung moderner Optik-Designprogramme.. rapidshare.com_Panik vor Thermodynamik
Buy [...]
Posted: April 27th, 2008, 2:20am CEST by e-man
Wiedemann: Leichtbau. Elemente und Konstruktion (Klassiker der Technik) German | PDF | 892 Seiten | Springer, Auflage: 3 (Dezember 2006) | ISBN 3540336567 | 46 MB
Dieses Werk behandelt eines der aktuellsten und bedeutendsten Themen der Konstruktionstechnik. Leichtbau setzt sich in allen Anwendungsgebieten durch. Jeder Konstrukteur im Fahrzeugbau, Schiffbau, Flugzeugbau, aber auch in anderen Gebieten [...]
Posted: April 27th, 2008, 2:20am CEST by e-man
Oliver Romberg: Keine Panik vor Mechanik!German | PDF | 343 Seiten | Vieweg+Teubner; Auflage: 5. Februar 2006 | ISBN 3528331321 | 12 MB
Der Begleiter durch das klassische “Loserfach” im Ingenieurstudium. Inhalt des Buches sind die Grundlagen der Mechanik, wie sie im ingenieurwissenschaftlichen Grundstudium behandelt werden, also Statik, Festigkeitslehre, Kinematik und Kinetik, in unkonventioneller, humorvoller [...]
Posted: April 27th, 2008, 2:19am CEST by e-man
Schneider, Hatto: Auswuchttechnik (VDI-Buch) German | PDF | 362 Seiten | Springer Auflage: 7 (20. Juli 2007) | ISBN 3540490914 | 19,6 MB
Man begegnet auszuwuchtenden Rotoren nicht nur bei industriellen Prozessen, sondern auch im alltäglichen Umfeld.Die Fülle der Teile, die ausgewuchtet werden - nahezu alles, was sich dreht - ist so groß, ihr Verhalten [...]
Posted: April 27th, 2008, 2:18am CEST by e-man
Peter von Böckh: Wärmeübertragung. Grundlagen und Praxis German | PDF | 260 Seiten | Springer, Auflage: 2(März 2006) | ISBN 3540314326 | 98 MB
Dieses Buch vermittelt wie kein anderes die Grundlagen der Wärmeübertragung. Es versetzt Leser in die Lage, Wärmeübertrager auszulegen und zu analysieren. Auf ausgedehnte theoretische Herleitungen der Wärmeübergangszahlen wird verzichtet, dafür die [...]
Posted: April 27th, 2008, 2:18am CEST by e-man
Steffen Clement: Pro/ENGINEER Wildfire 3.0 für Fortgeschrittene - kurz und bündigGerman | PDF |110 Seiten | Vieweg+Teubner; A 1 (25. Oktober 2007) | ISBN 3834801844 | 2,3 MB
Aufbauend auf den Grundlagen der parametrischen und featurebasierten 3D-Modellierung vermittelt das Übungsbuch effektiv weiterführende praxisrelevante Anwendungen des CAD/CAM-Systems Pro/ENGINEER Wildfire 3.0. Der Fokus liegt dabei auf einer [...]
Posted: April 27th, 2008, 2:16am CEST by e-man
Robert Gasch: Rotordynamik German | PDF | 705 Seiten | Springer Auflage: 2. (Oktober 2007) | ISBN 3540412409 | 26 MB
Dieses Buch wurde ebenso für Praktiker in der Industrie wie für Studenten von Hoch- und Fachhochschulen geschrieben. Das Buch ist mosaik-artig aufgebaut: jedes Kapitel ist weitgehend für sich lesbar und abgeschlossen abgefaßt. So wird [...]
Posted: April 27th, 2008, 2:14am CEST by e-man
by John Gregory ” Particles in Water: Properties And Processes “Intl Water Assn | Pages:200 | 2005-09-30 | ISBN: 1843391023 | PDF | 2 Mb
http://rapidshare.com/files/110602109/particles_in_water_isbn1843391023.rarOrhttp://www.megaupload.com/?d=KHTOLCJW
Buy me a CoffeeShare This
Posted: April 26th, 2008, 10:57pm CEST by e-man
David G. Bucknall “Nanolithography and Patterning Techniques in Microelectronics” Woodhead Publishing | 2005-01 | ISBN: 1855739313 | 409 pages | PDF | 6,6 Mb
Despite decades of extensive research in this field, no solution to the problem of optimal part surface generation has been found. Kinematic Geometry Surface Machining fills the gap between the capabilities of [...]
Posted: April 26th, 2008, 12:43am CEST by e-man
Grote : Dubbel Taschenbuch für den Maschinenbau (Studium Technik) German | PDF | 1798 Seiten | Springer Auflage: 22. August 2007) | ISBN: 3540497145 | 98 MB
Das ist der Klassiker unter den Lehrbüchern und Nachschlagewerken für die produkt- und fertigungsorientierten Fachgebiete des Maschinenbaus. Die Bezeichnung Taschenbuch für das inhaltlich und “formal” schwergewichtige Werk ist [...]
Posted: April 26th, 2008, 12:24am CEST by e-man
Alfred Herbert Fritz Günter Schulze :Fertigungstechnik (VDI-Buch)German | PDF | 505 Seiten | Springer,8.Auflage 2008) | ISBN: 3540256237 | 23 MB
Die Wahl des Fertigungsverfahrens beeinflusst die Kosten der Produktion maßgeblich; eine richtige Entscheidung kann helfen, Beträge in Millionenhöhe einzusparen. In die neue Auflage des “Klassikers der Fertigungstechnik” wurden aktuelle Bezeichnungen und Fachbegriffe aufgenommen und [...]
Posted: April 26th, 2008, 12:24am CEST by e-man
Stephen P. Radzevich “Kinematic Geometry of Surface Machining” CRC | 2007-12-14 | ISBN: 1420063405 | 536 pages | PDF | 8,8 Mb
Despite decades of extensive research in this field, no solution to the problem of optimal part surface generation has been found. Kinematic Geometry Surface Machining fills the gap between the capabilities of modern multi-axis [...]
Posted: April 26th, 2008, 12:21am CEST by e-man
David Tolfree, Mark J. Jackson “Commercializing Micro-Nanotechnology Products” CRC | 2007-11-19 | ISBN: 0849383153 | 288 pages | PDF | 20,7 Mb
Micro-nanotechnologies (MNT) are already making a profound impact on our daily lives. New applications are well underway in the US, Asia, and Europe. However, their potentially disruptive nature, along with the public’s concerns, has [...]
Posted: April 26th, 2008, 12:20am CEST by e-man
Horst Czichos: Mechatronik. Grundlagen und Anwendungen technischer Systeme (Studium Technik) German | PDF | 219 Seiten | Vieweg; Auflage: 1 (September 2006) | ISBN: 3834801712 | 76 MB
Mit 285 Abbildungen und 10 Tabellen Dieses Fachbuch beschreibt mit aussagekräftigen Abbildungen kurz und prägnant die Grundlagen und Anwendungen der Mechatronik: von der Makro- und Mikrotechnik bis hin [...]
Posted: April 25th, 2008, 11:50pm CEST by e-man
Bettina von Stamm, Bettina Von Stamm “The Innovation Wave: Addressing Future Challenges”
Wiley | 2002-12-16 | ISBN: 0470847425 | 256 pages | PDF | 1,6 Mb
Focusing on the future challenges companies face in being continously innovative, this book is based on a combination of world class talks given at the Innovation Exchange (IE) [...]
Posted: April 24th, 2008, 1:22pm CEST by e-man
Frede Blaabjerg, Zhe Chen “Power Electronics for Modern Wind Turbines”
Morgan & Claypool Publishers | 2006-07-15 | ISBN: 1598290320 | 120 pages | PDF | 1,9 Mb
Wind energy is now the world’s fastest growing energy source. In the past 10 years, the global wind energy capacity has increased rapidly. The installed global wind [...]
Posted: April 24th, 2008, 12:46pm CEST by e-man
Alfred Böge: Technische Mechanik.
German | PDF | 464 Seiten | Vieweg,27.Aufl.,Juli 2006 | ISBN: 3528150106 | 27 MB
Seit vielen Jahren ist der Böge das Standardlehrwerk für die Technische Mechanik an den Technikerschulen. Wegen seiner Klarheit der Darstellung und der leichten Lernbarkeit des Lehrstoffes hat es sogar Eingang in das Studium an Fachhochschulen und Höheren [...]
Posted: April 24th, 2008, 12:45pm CEST by e-man
Dresig, Hans, Holzweißig, Franz: Maschinendynamik (Springer Lehrbuch)
German | PDF | 526 Seiten | Springer,8.Aufl., 2007 | ISBN: 9783540720324 | 6,7 MB
Behandelt werden die klassischen Gebiete der Modellbildung, der Antriebsdynamik, Auswuchten und Massenausgleich, Torsions- und Biegeschwingungen, die Schwingungsisolierung und das dynamische Verhalten komplexer Schwingungssysteme.
rapidshare.com_Maschinendynamik
Buy me a CoffeeShare This
Posted: April 24th, 2008, 12:45pm CEST by e-man
Rex Miller , Mark R. Miller ” Electricity and Electronics for HVAC “
McGraw-Hill Professional; 1 edition (August 9, 2007) | ISBN: 0071496688 | 380 pages | PDF | 5 Mb
Master the Electric and Electronic Components that Control Today’s Air Conditioning, Heating, and Refrigeration Systems!
Electricity and Electronics for HVAC provides an expert account of the electric [...]
Posted: April 24th, 2008, 12:44pm CEST by e-man
Niemann: Maschinenelemente 1. Konstruktion und Berechnung von Verbindungen, Lagern, Wellen
German | PDF | 927 Seiten | Springer, 4. A. (April 2005) | ISBN: 3540251251 | 16 MB
Das Standardwerk auf dem Gebiet der Maschinenelemente gibt sowohl einen Gesamtüberblick als auch umfassende Detailinformation zu allen relevanten Themen. Der klare Aufbau, Beispiele zu allen Berechnungen sowie [...]
Posted: April 24th, 2008, 12:42pm CEST by e-man
Herbert Rees ” Understanding Product Design for Injection Molding (Hanser Understanding Books) “
Hanser Gardner Pubns (June 1996) | ISBN: 1569902100 | 116 pages | PDF | 21.3 Mb
a book about molding “Understanding Product Design for Injection Molding (Hanser Understanding Books)”.
download part1 part2
Buy me a CoffeeShare This
Posted: April 24th, 2008, 12:40pm CEST by e-man
John E. Bringas ” Handbook of Comparative World Steel Standards (Astm Data Series Publication, Ds 67a.) “
ASTM International; 2nd edition (December 2001) | ISBN: 0803130422 | 660 pages | PDF | 3.6 Mb
Get a detailed explanation of HOW & WHY one steel is comparable to another—NO OTHER BOOK currently on the market does this. Completely [...]
Posted: April 24th, 2008, 12:38pm CEST by e-man
Helical Springs (Engineering Design Guides)
Oxford University Press (October 23, 1975) | ISBN: 019859142X | 22 pages | PDF | 6.57 Mb
engineering design guide for designing helical springs.
download
Buy me a CoffeeShare This
Posted: April 24th, 2008, 12:32pm CEST by e-man
Horst Haberhauer: Maschinenelemente
German | PDF |650 Seiten | Springer, Berlin (2007) | ISBN: 354041262X | 12 MB
“…eine gründliche und vollständige Überarbeitung und Straffung des gesamten Stoffgebietes, das didaktisch begründete Weglassen einer Formelsammlung… Das Werk hat dadurch gewonnen … Hervorragend gestaltete Zeichnungen, Diagramme und Tabellen unterstützen … den Leser … ein wertvolles Hilfsmittel [...]
Posted: April 24th, 2008, 12:31pm CEST by e-man
R. Clift , J. R. Grace , M. E. Weber ” Bubbles, Drops, and Particles “
Dover Publications (December 2, 2005) | ISBN: 0486445801 | 400 pages | djvu | 6 Mb
Geared toward students and professionals in the fields of engineering, physics, chemistry, geophysics, and applied mathematics, this volume offers a unified treatment and critical review [...]
Posted: April 24th, 2008, 12:30pm CEST by e-man
C. K. Gupta , D. Sathiyamoorthy ” Fluid Bed Technology in Materials Processing “
CRC; 1 edition (December 28, 1998) | ISBN: 0849348323 | 528 pages | PDF | 6.7 Mb
Fluid Bed Technology in Materials Processing comprehensively covers the various aspects of fluidization engineering and presents an elaborate examination of the applications in a multitude of [...]
Posted: April 24th, 2008, 12:30pm CEST by e-man
Martjin Wisse , Richard Q. van der Linde
” Delft Pneumatic Bipeds (Springer Tracts in Advanced Robotics) “
Springer; 1 edition (August 17, 2007) | ISBN: 3540728074 | 136 pages | PDF | 3.52 Mb
Walking is simple for most of us, but two-legged robots (bipeds) are often slow, complex, inefficient, heavy, and have robotic-looking motions. What makes [...]
Posted: April 24th, 2008, 12:26pm CEST by e-man
Mohamed Gad-el-Hak ” MEMS: Design and Fabrication (Mechanical Engineering) “
CRC ; 2 edition | 2005 | ISBN: 0849391385 | English | 664 pages | 42.5 MB
As our knowledge of microelectromechanical systems (MEMS) continues to grow, so does The MEMS Handbook. The field has changed so much that this Second Edition is now available in three [...]
Posted: April 24th, 2008, 12:20pm CEST by e-man
Jörg Grabner: Konstruieren von Pkw-Karosserien Grundlagen, Elemente Und Baugruppen, Vorschriftenubersicht, Beispiele MIT Catia V4 Und V5
German | PDF | 325 Seiten | Springer, Auflage: 3., erw. A. (Februar 2006) | ISBN: 3540238840 | 14 MB
Die Faszination, die vom Auto ausgeht, ist und bleibt ungebrochen. Entsprechend interessant ist es, sich vor dem Hintergrund konventioneller Konstruktionstechniken über [...]
Posted: April 24th, 2008, 12:19pm CEST by e-man
J. F. Manwell, J.G. McGowan, A.L. Rogers “Wind Energy Explained: Theory, Design and Application”
John Wiley & Sons | ISBN: 9780471499725 | 590 pages | June 2002 | PDF | 26 MB
This authoritative textbook is intended to provide both a thorough and highly accessible introduction to the cross-disciplinary field of wind engineering. The economic viability and [...]
Posted: April 23rd, 2008, 3:07pm CEST by e-man
Seismic Design of Reinforced and Precast Concrete Buildings
Wiley | March 10, 2003 | ISBN: 1405133376 | 848 pages | PDF | 17,7 Mb
Link:
http://rapidshare.com/files/109736803/seismic_design_of_reinforced_and_precast_concrete_buildings.rar
Share This
Posted: April 23rd, 2008, 3:06pm CEST by e-man
Lightweight Aggregate Concrete
Noyes Publications | 1st edition (June 15, 2002) | ISBN: 0815514867 | 450 pages | PDF - English | 3,4 Mb
Link
http://rapidshare.com/files/109743924/Lightweight_Aggregate_Concrete.rar
Share This
Posted: April 22nd, 2008, 8:38pm CEST by e-man
Methods of Electronic-Structure Calculations: From Molecules to SolidsWiley | 2000-07-13 | ISBN: 0471979759 | 516 pages | PDF | 31,8 Mb
Methods of Electronic-Structure Calculations From Molecules to Solids Michael Springborg Department of Chemistry, University of Konstanz, Germany Electronic-structure calculations of the properties of specific materials have become increasingly important over the last 30 years. Although [...]
Posted: April 22nd, 2008, 8:31pm CEST by e-man
Wind Energy ExplainedWiley | 2002 | ISBN 0471499722 | English | 590 pages | PDF | 26.3 MB
“…well written and comprehensive …deserves a place in the library of every university and college where renewable energy is taught.” (The International Journal of Electrical Engineering Education, Vol.41, No.2 April 2004)“…provides a wealth of information and is an [...]
Posted: April 21st, 2008, 2:49pm CEST by e-man
Pressure Vessel Design: The Direct Route (Advances in Structural Integrity)
Elsevier Science (August 24, 2006) | ISBN: 0080449506 | 320 pages | PDF | 3.9 Mb
This book explores a new, economically viable approach to pressure vessel design, included in the (harmonized) standard EN 13445 (for unfired pressure vessels) and based on linear as well as non-linear [...]
Posted: April 21st, 2008, 2:49pm CEST by e-man
Donatello Annaratone “Pressure Vessel Design”
Springer; 1 edition (March 12, 2007) | ISBN: 3540491422 | 455 pages | PDF | 5.87 Mb
This book guides through general and fundamental problems of pressure vessel design. It moreover considers problems which seem to be of lower importance but which turn out to be crucial in the design phase. The [...]
Posted: April 21st, 2008, 2:46pm CEST by e-man
David Macdonald “Practical Machinery Safety (Practical Professional Books from Elsevier)”
Newnes; 1 edition (September 9, 2004) | ISBN: 0750662700 | 289 pages | PDF | 8.3 Mb
“..a very practical and useful book which is well worth reading and studying”
HEALTH AND SAFETY REVIEW, Jan/Feb 2005
“…provides an excellant source of reference and information on machinery safety…effectively provides a [...]
Posted: April 21st, 2008, 2:09pm CEST by e-man
John A. Goldak , Mehdi Akhlaghi “Computational Welding Mechanics”
Springer; 1 edition (June 2, 2005) | ISBN: 0387232877 | 321 pages | PDF | 17.3 Mb
Computational Welding Mechanics (CWM) provides readers with a complete introduction to the principles and applications of computational welding including coverage of the methods engineers and designers are using in computational welding [...]
Posted: April 21st, 2008, 1:18pm CEST by e-man
by Shuzhi Sam Ge , Frank L. Lewis
“Autonomous Mobile Robots: Sensing, Control, Decision Making and Applications (Control Engineering)”
CRC | Pages: 672 | 2006 | ISBN: 0849337488 | 23.3 MB
It has long been the goal of engineers to develop tools that enhance our ability to do work, increase our quality of life, or perform tasks that [...]
Posted: April 20th, 2008, 1:58am CEST by e-man
David Vernon, “Machine Vision: Automated Visual Inspection and Robot Vision”Prentice Hall | ISBN: 0135433983 | 1991 | PDF | 260 pages | 36.6 MB
machine vision is a multi-disciplinary subject , utilizing techniques drawn from optics , electronics , mechanical engineering , computer science , and artificial intelligence .
download
Share This
Posted: April 20th, 2008, 1:49am CEST by e-man
Introduction to Particle TechnologyWiley | ISBN: 047001427X | 2008-05-09 | PDF | 472 pages | 14.6 MB
This textbook is a comprehensive introduction to the many concepts of this broad subject. Case studies are provided alongside real-life industrial applications illustrating the techniques and theory. This book will be essential reading for students of chemical engineering on [...]
Posted: April 20th, 2008, 1:34am CEST by e-man
Paper and Paperboard Packaging TechnologyWiley-Blackwell | ISBN: 1405125039 | 1991-01-15 | PDF | 456 pages | 3.6 MB
This book discusses all the main types of packaging based on paper and paperboard. It considers the raw materials and manufacture of paper and paperboard, and the basic properties and features on which packaging made from these materials [...]
Posted: April 20th, 2008, 1:30am CEST by e-man
Rudolf F. Graf, William Sheets “Encyclopedia of Electronic Circuits Volume 2″McGraw-Hill/TAB Electronics (1988-11-01) | ISBN 0830631380 | 755 Pages | PDF | 21.4 Mb
Thanks to original uploader.
Download From RapidshareorDownload From MegauploadorDownload From Easy-Share
Share This
Posted: April 18th, 2008, 9:16pm CEST by e-man
Holger Watter - Hydraulik und Pneumatik. Grundlagen und Übungen - Anwendungen und Simulation German | PDF | Seiten: 445 | Vieweg+Teubner 25. September 2007 | ISBN 3834801909 | 14MB
Dieses Lehr- und Übungsbuch gibt eine anwendungs- und praxisorientierte Darstellung zu hydraulischen und pneumatischen Systemen. Wichtige Konstruktionselemente und deren Regelung sowie die Darstellung von Simulationsberechnungen ermöglichen [...]
Posted: April 18th, 2008, 9:10pm CEST by e-man
Kevin Mukhar, Dave Johnson, “The Ultimate Palm Robot”Osborne/McGraw-Hill | 304 pages | 2003 | ISBN: 0072228806 | PDF | 5.84 MB
Recorded too many addresses you’ll never need? Can’t remember how the make a question mark in Graffiti? Recycle your old handheld and build your own Palm-powered robot. Complete with proprietary software designed specially for Osborne [...]
Posted: April 18th, 2008, 9:07pm CEST by e-man
by Klaus-Jurgen Bathe “Finite Element Procedures “Publisher: Prentice Hall | Number Of Pages:1037 | 1995-06-26 | ISBN: 0133014584 | DJVU | 7 Mb
One of the most thorough references on the finite element technique. The text focuses on proven and tested methods for analysis, focusing on the analytical foundations of FEA. Although it does cover some [...]
Posted: April 18th, 2008, 8:55pm CEST by e-man
Ronald N. Bracewell “The Fourier Transform & Its Applications”McGraw-Hill Science/Engineering/Math | Number Of Pages: 640 | 1999-06-08 | ISBN: 0073039381 | DJVU | 14 Mb
This text is designed for use in a senior undergraduate or graduate level course in Fourier Transforms. This text differs from many other fourier transform books in its emphasis on applications. [...]
Posted: April 18th, 2008, 3:39pm CEST by e-man
Zhen Liu, Cathy H. Xia “Performance Modeling and Engineering”
Springer | 2008-05-28 | ISBN: 0387793607 | 224 pages | PDF | 2 Mb
This book presents the latest advances in methodology and techniques of performance modeling and engineering, ranging from theoretical advances to system and architecture developments, from technology to economics, from academic innovations [...]
Posted: April 16th, 2008, 12:08pm CEST by e-man
Honda Hornet cb600f W Service manual
English | PDF | pages:372 | Honda | ISBN no | 90MB
rapidshare.com_Honda_Hornet_cb600f_part1
rapidshare.com_Honda_Hornet_cb600f_part2
rapidshare.com_Honda_Hornet_cb600f_part3
Share This
Posted: April 16th, 2008, 12:05pm CEST by e-man
BMW Repair manual - C1 - C1 200
English | PDF | pages:229 | BMW |ISBN no | 60 MB
Das ursprüngliche Modell hatte einen 1-Zylinder-Viertaktmotor mit einem Hubraum von 125 cm³; die Höchstgeschwindigkeit lag bei ca. 106 km/h. Kraftstoffverbrauch laut Werksangabe: 2,9 l/100 km (Superbenzin), real erfahrungsmäß etwas höher. Im Jahre 2001 wurde der C1 [...]
Posted: April 16th, 2008, 11:53am CEST by e-man
Michael A. Bean, “Probability: The Science of Uncertainty with Applications to Investments, Insurance, and Engineering”
Brooks Cole | ISBN: 0534366031 | 1 edition | DJVU | 464 pages | 17557 KB
“
Bean’s PROBABILITY: THE SCIENCE OF UNCERTAINTY WITH APPLICATIONS TO INVESTMENTS, INSURANCE, AND ENGINEERING is an ‘applied’ book that will be of interest to instructors teaching probability [...]
Posted: April 15th, 2008, 9:20pm CEST by e-man
Jos Arrillaga, Y. H. Liu, Neville R. Watson, “Flexible Power Transmission: The HVDC Options”Wiley | Number Of Pages:374 | 2007-11-05 | ISBN: 0470056886 | PDF l 7 Mb
The development of power semiconductors with greater ratings and improved characteristics has meant that the power industry has become more willing to develop new converter configurations. These new [...]
Posted: April 15th, 2008, 9:09pm CEST by e-man
Bikash Pal, Balarko Chaudhuri “Robust Control in Power Systems (Power Electronics and Power Systems)”Springer | Number Of Pages:190 | 2005-06-21 | ISBN: 038725949X | PDF | 7 Mb
Robust Control in Power Systems deals with the applications of new techniques in linear system theory to control low frequency oscillations in power systems. The book specifically focuses [...]
Posted: April 15th, 2008, 9:06pm CEST by e-man
by Xiao-Ping Zhang, Christian Rehtanz, Bikash Pal “Flexible AC Transmission Systems: Modelling and Control (Power Systems)”Springer l Number Of Pages: 383 l 2006-03-21 l ISBN:3540306064 l PDF l 3 Mb Book Description: This monograph presents advanced modelling, analysis and control techniques of FACTS. These topics reflect the recent research and development of FACTS controllers, and [...]
Posted: April 15th, 2008, 8:58pm CEST by e-man
Hiroshi Kimura, Kazuo Tsuchiya, Akio Ishiguro, Hartmut Witt, “Adaptive Motion of Animals and Machines”Springer | 280 pages | 2005 | ISBN: 4431241647 | PDF | 7.73 MB
The principles of adaptation to various environments have not yet been clarified. Furthermore, autonomous adaptation remains unsolved and a seriously difficult problem in robotics. Apparently, the adaptation ability shown [...]
Posted: April 14th, 2008, 4:00pm CEST by e-man
Ozren Ocic (Author), “Oil Refineries in the 21st Century: Energy Efficient, Cost Effective, Environmentally Benign”
Wiley-VCH | 1 edition | January 31, 2005 | ISBN: 9783527311941 | PDF | English | 1.4 Mb | 166 pages | RS
“A very detailed, workable approach to improving energy efficiency and cost effectiveness…”
A very detailed, workable approach to improving [...]
Posted: April 14th, 2008, 4:00pm CEST by e-man
D.R. Cox and N. Reid (Author), “The Theory of the Design of Experiments”
CRC | 1 edition | June 6, 2000 | ISBN: 9781584881957 | PDF | English | 1.3 Mb | 336 pages | RS
“This book is about the design of experiments…”
Why study the theory of experiment design? Although it can be useful to [...]
Posted: April 14th, 2008, 3:58pm CEST by e-man
Anthony F. Sammells and Michael V. Mundschau (Editor), “Nonporous Inorganic Membranes: for Chemical Processing”
Wiley-VCH | 1 edition | September 29, 2006 | ISBN: 9783527313426| PDF | English | 5.2 Mb | 291 pages | RS
“This reference book addresses the evolution of materials for both oxygen and hydrogen transport membranes…”
This reference book addresses the evolution [...]
Posted: April 14th, 2008, 3:58pm CEST by e-man
Harrington, Inc. (Author), “Engineering Handbook for Industrial Plastic Systems”
Harrington | 1 edition | ISBN: NA | PDF | English | 1.7 Mb | 107 pages | RS
A must reference for industrial plastic systems!
DOWNLOAD HERE
Share This
Posted: April 14th, 2008, 3:53pm CEST by e-man
Energy Technology Support Unit & WS Atkins Consultants Ltd. (Author), “Guide to Compact Heat Exchangers Types”
Energy Technology Support Unit & WS Atkins Consultants Ltd. | 1 edition | ISBN: NA | PDF | English | 3.2 Mb | 65 pages | RS
All descriptions about compact heat exchangers types are here!
DOWNLOAD HERE
Share This
Posted: April 14th, 2008, 11:46am CEST by e-man
John Ross “The Book of Wireless: A Painless Guide to Wi-Fi and Broadband Wireless”
No Starch Press (2008-01-18) | ISBN 1593271697 | 352 Pages | PDF | 8.9 Mb
Broadband wireless networks bring us closer to the Internet’s ultimate destiny of interconnecting everyone, everywhere. But wireless networking can be a bit geeky and nerve-wracking without a proper [...]
Posted: April 14th, 2008, 11:11am CEST by e-man
Vern A. Dubendorf,«Wireless Data Technologies Reference Handbook»
John Wiely | ISBN: 0470849495 | PDF | 1,22 Mb | 448 Pages | 2003 Year
“Wireless Technologies in general have been growing at a rate that out shadows the public advent of the Internet. Fueling the increased interest in Wireless Local Area Networks (WLANs) is the relative and growing [...]
Posted: April 14th, 2008, 10:34am CEST by e-man
Erwin Haibach: Betriebsfestigkeit. Verfahren und Daten zur Bauteilberechnung
German | PDF | Februar 2006 | Seiten: 765 | Springer, Berlin · 2006 | ISBN 3540293639 | 13 MB
Das Bemessungskonzept “Betriebsfestigkeit” verfolgt das Ziel, Maschinen, Fahrzeuge oder andere Konstruktionen gegen zeitlich veränderliche Betriebslasten unter Berücksichtigung ihrer Umgebungsbedingungen für eine bestimmte Nutzungsdauer zuverlässig bemessen zu können. Ingenieure, [...]
Posted: April 14th, 2008, 10:28am CEST by e-man
Dieter Radaj: Ermüdungsfestigkeit - Grundlagen für Ingenieure
German | PDF | Seiten: 699 | Springer, Berlin · 2007 | ISBN 9783540714583 | 15 MB
Ingenieure in Entwicklung, Konstruktion, Berechnung, Prüfung und Versuch benötigen fundiertes, jedoch praxisnah aufbereitetes Wissen über die mechanischen und werkstoffkundlichen Grundlagen der Ermüdungsfestigkeit, wie es dieses Buch bereitstellt. Damit wird einerseits die [...]
Posted: April 14th, 2008, 10:25am CEST by e-man
S. Basu, “Recent Trends in Fuel Cell Science and Technology”
Springer | 260 pages| 2007 | 0387355375 | PDF | 24.8 MB
The book covers all the proposed fuel cell systems including PEMFC, SOFC, PAFC, MCFC, regenerative fuel cells, direct alcohol fuel cells, and small fuel cells to replace batteries.
download part1(13.3mb) part2 (11.4mb)
Share This
Posted: April 14th, 2008, 10:24am CEST by e-man
Harald Naunheimer - Fahrzeuggetriebe : Grundlagen, Auswahl, Auslegung Und Konstruktion (VDI-Buch)
German | PDF | Seiten: 732 | Springer, Berlin · 2007 | ISBN 3540306250 | 17 MB
Das Buch stellt alle wichtigen Kenntnisse bereit, die ein Entwickler für den Antriebstrang benötigt. Vollständig, praxisgerecht und theoretisch fundiert werden die Grundlagen de Systeme im Antriebsstrang dargelegt, die [...]
Posted: April 14th, 2008, 10:08am CEST by e-man
Bernd Klein: FEM. Grundlagen und Anwendungen der Finite-Elemente-Methode
German | PDF | Seiten: 416 | Vieweg; 7. Auflage Juni 2007) | ISBN 9783834802965 | 5 MB
Die CAE-Technik als integratives Verfahren zum Konstruieren und Berechnen verändert derzeit die Arbeitsweise der Ingenieure. Als universelles Lösungsverfahren hat sich die Finite-Elemente-Methode bewährt, die in der Elastostatik, Elastodynamik, Wärmeleitung und Strömungsmechanik [...]
Posted: April 14th, 2008, 10:04am CEST by e-man
ASM International, “Asm Speciality Handbook: Heat Resistant Materials (Asm Specialty Handbook)”
ASM International | Number Of Pages:591 | 1997-05-01 | ISBN: 0871705966 | PDF | 123 Mb
Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural [...]
Posted: April 13th, 2008, 10:00pm CEST by e-man
Aprilia (Rotax) 125ccm Engine Manual Typ122German / English | PDF | Seiten:99 | BOMBARDIER-ROTAX GMBH - Austria | 5 MBThis Repair Manual contains essential advice and data for professional maintenance and repair of ROTAX engine type 122.Dieses Reparatur-Handbuch enthält die wichtigsten Hinweise und Daten für die fachgerechte Wartung und Reparatur des ROTAX-Motors Type 122.
Technical [...]
Posted: April 13th, 2008, 9:54pm CEST by e-man
Aprilia RS125 Parts Diagrams ExplodedEnglish | PDF | 3 MB | Seiten:88 | Aprilia
rapidshare.com_Aprilia_RS125_PartsExplodedAprilia RS125 1999 Bedienungsanleitung -Germanrapidshare.com_Aprilia_RS125
Share This
Posted: April 13th, 2008, 9:47pm CEST by e-man
by ASTM International “Mil 17 the Composite Materials Handbook,Volume 5 Ceramic Matrix Composites”ASTM International | Number Of Pages: 267 | 2002-07 | ISBN:0803133545 | PDF | 2 Mb
MIL17, VOLUME 5: Ceramic Matrix Composites features the first published edition of the CMC handbook, which includes information on relevant, commercially available CMC composite systems describing:• system properties [...]
Posted: April 13th, 2008, 9:40pm CEST by e-man
by Oberg “Machinery’s Handbook 26th Edition (Machinery’s Handbook) “industrial Press, Inc | Number Of Pages: 2640 | 2000-04-15 | ISBN: 0831126256 | PDF | 19 Mb
While virtually every section has been carefully reviewed and updated to one degree or another, the following are the most notable improvements:* Nearly 100 pages longer overall than prior editions.* [...]
Posted: April 13th, 2008, 2:17am CEST by e-man
Hans Theumert: Entwickeln, Konstruieren, Berechnen German | PDF | 2 MB | Seiten: 211 | Vieweg+Teubner; Auflage: 1 (August 2007) | ISBN 9783834801234
Ca. 10 % der Gesamtkosten des Produktionsprozesses entstehen in der Konstruktionsabteilung, aber ungefähr 75% des wirtschaftlichen Aufwands eines neuen Produkts werden durch deren Arbeitsergebnis bestimmt. Dieses Lehr- und Übungsbuch lehnt sich an [...]
Posted: April 13th, 2008, 2:00am CEST by e-man
Eduard Köhler, Rudolf Flier, Verbrennungsmotoren German | PDF | 2 MB | Seiten:481 | Vieweg+Teubner; Auflage: 4.2006) | ISBN 3528431083
Die bewegten und unbewegten Bauteile eines Kolbenmotors sind statischen und dynamischen Beanspruchungen ausgesetzt, die den Gesetzen der Mechanik folgen. In diesem Buch werden die einzelnen Motorkomponenten mit den dazugehörenden Berechnungsverfahren vorgestellt. Neben zahlreichen praktischen Auslegungshinweisen [...]
Posted: April 11th, 2008, 11:24pm CEST by e-man
Jan De Kock Cobus Strauss, “Practical Power Distribution for Industry”
Newnes | Number Of Pages: 192 | 2004-09-09 | ISBN: 0750663960 | PDF | 9 Mb
The book provides technical know-how not covered by most universities and colleges in a subject that is central to the roles of many electrical engineers in industry, focusing on switchgear, power [...]
Posted: April 11th, 2008, 10:43pm CEST by e-man
Shulim E. Tsimring “Electron Beams and Microwave Vacuum Electronics” Wiley-Interscience; 1 edition (October 6, 2006) | ISBN: 0470048166 | 573 pages | PDF | 6 Mb
This book focuses on a fundamental feature of vacuum electronics: the strong interaction of the physics of electron beams and vacuum microwave electronics, including millimeter-wave electronics. The author guides readers [...]
Posted: April 11th, 2008, 2:11pm CEST by e-man
Wolfgang Böge, Wilfried Plaßmann - Formeln und Tabellen Elektrotechnik
German | PDF | Seiten: 359 | Vieweg & Sohn Verlag | 1. Auflage 2007 | ISBN 9783528039738 | 9 MB
Kompakt und systematisch - das sind die Kennzeichen der Formelsammlung, die zum Beginn des Elektrotechnikstudiums bei keinem Studenten fehlen darf. Häufig gebrauchte Formeln und Tabellen wurden aufgrund [...]
Posted: April 11th, 2008, 2:09pm CEST by e-man
Karl Küpfmüller ·Wolfgang Mathis - Theoretische Elektrotechnik
German | PDF | 9 MB | Seiten: 750 | Springer Verlag | 17. Auflage | ISBN 354029290
Diese Einführung in die theoretische Elektrotechnik gehört inzwischen zu den klassischen Lehrbüchern. Der Inhalt wurde in sechs Jahrzehnten und mittlerweile 15 Auflagen ständig aktualisiert und bei der vorliegenden Ausgabe auf die Elektronik [...]
Posted: April 11th, 2008, 2:07pm CEST by e-man
Jens-Rainer Ohm · Hans Dieter Lüke - Signalübertragung
German | PDF | 5 MB | Seiten: 499 | Springer Verlag |10. Auflage | ISBN 9783540692560
Das didaktisch hervorragende und bewährte Standardlehrbuch zur Signalübertragung liegt nunmehr in 10. Auflage vor. Studenten der Elektrotechnik, Informatik und Physik sowie Praktiker aus Industrie und Forschung erhalten hier die anschauliche Einführung in [...]
Posted: April 11th, 2008, 1:56pm CEST by e-man
Rolf Fischer - Elektrische Maschinen (Hanser Lehrbuch)
German | PDF | 7 MB | Seiten: 410 | 2004 Hanser Verlag | ISBN 3446226931
Dieses Buch beschreibt Aufbau, Wirkungsweise und Betriebsverhalten der elektrischen Maschinen und Transformatoren. Stoffauswahl und Umfang sind mit der Absicht festgelegt, ein vorlesungsbegleitendes Buch für das Studium während einer Ingenieurausbildung anzubieten. Daneben soll es [...]
Posted: April 11th, 2008, 1:53pm CEST by e-man
S. L. Dixon “Fluid Mechanics and Thermodynamics of Turbomachinery, Fifth Edition”
Butterworth-Heinemann | 2005-02-23 | ISBN: 0750678704 | 412 pages | PDF | 4,6 Mb
The new edition will continue to be of use to engineers in industry and technological establishments, especially as brief reviews are included on many important aspects of Turbomachinery, giving [...]
Posted: April 11th, 2008, 1:23pm CEST by e-man
T. H. G. Megson “Structural and Stress Analysis”
Butterworth-Heinemann | 2005-04-15 | ISBN: 0750662212 | 744 pages | PDF | 6,6 Mb
Structural analysis is the corner stone of civil engineering and all students must obtain a thorough understanding of the techniques available to analyse and predict stress in any structure.
The new edition of [...]
Posted: April 11th, 2008, 1:08pm CEST by e-man
Peter H. Zipfel “Modeling and Simulation of Aerospace Vehicle Dynamics”
AIAA (American Institute of Aeronautics & Ast) | 2007-04-15 | ISBN: 1563478757 | 567 pages | PDF | 5,7 Mb
This book unifies all aspects of flight dynamics for the efficient development of aerospace vehicle simulations. It provides the reader with a complete set [...]
Posted: April 11th, 2008, 12:27pm CEST by e-man
Wilfried Weißgerber - Elektrotechnik für Ingenieure 2
German | PDF | 7 MB | Seiten: 383 | Viewegs Verlag | 6.Auflage Mai 2007 | ISBN: 9783834801913
Kurzbeschreibung Bei der Darstellung der Wechselstromtechnik, Ortskurven, Transformatoren und Mehrphasensystemen sind die physikalischen Zusammenhänge aus der Sicht des Ingenieurs dargestellt, der die Elektrotechnik anwendet. Herleitungen und Übungsbeispiele sind ausführlich behandelt. Ein [...]
Posted: April 11th, 2008, 12:26pm CEST by e-man
Wilfried Weißgerber - Elektrotechnik für Ingenieure 1+ Band3
German | PDF | 7 MB | Seiten: 451 | Viewegs Verlag | 7.Auflage März 2007 | ISBN: 9783834800589
rapidshare.com_Elektrotechnik_Ingenieure_1
Share This
Posted: April 10th, 2008, 3:10pm CEST by e-man
Quality Control Methods For Medicinal Plant Materials
WHO | ISBN: 9241545100 | 1998 | PDF | 123 pages | 1.61 Mb | RS
http://rapidshare.com/files/98168926/qualitycontrolmeth_-_WHO.pdf
Share This
Posted: April 10th, 2008, 2:33pm CEST by e-man
Singiresu S. Rao “Engineering Optimization: Theory and Practice, 3rd Edition”
Wiley-Interscience | Number Of Pages: 920 | 1996-02-15 | ISBN: 0471550345 | PDF | 24 Mb
A rigorous mathematical approach to identifying a set of design alternatives and selecting the best candidate from within that set, engineering optimization was developed as a means of helping engineers to [...]
Posted: April 10th, 2008, 1:58pm CEST by e-man
by Richard Shell “Handbook of Industrial Automation”
CRC | Pages: 887 | 2000-08-29 | ISBN: 0824703731 | PDF | 15 Mb
Book Description:
“Supplies the most essential concepts and methods necessary to capitalize on the innovations of industrial automation, including mathematical fundamentals, ergonometrics, industrial robotics, government safety regulations, and economic analyses.”
http://rapidshare.com/files/106192048/handbook_of_industrial_automation.rar
Or
http://depositfiles.com/en/files/4643439
Share This
Posted: April 9th, 2008, 4:15pm CEST by e-man
David R. Shircliff, “Build A Remote-Controlled Robot”
ISBN: 0071385436 | 5/25/2002 | 112 page | PDF | 1.8 MB
TAB Electronics is the premier name in amateur robotics. Since the 1987 release of Gordon McComb’s blockbuster Robot Builder’s Bonanza hobbyists have looked to TAB as the source for cutting-edge, how-to robotics titles.
These groundbreaking, heavily illustrated books explain [...]
Posted: April 9th, 2008, 4:13pm CEST by e-man
Cristian Secchi , Stefano Stramigioli , Cesare Fantuzzi
” Control of Interactive Robotic Interfaces: A Port-Hamiltonian Approach “
springer | 2007 | ISBN: 3540497129 | 233 pages | PDF | 2.24 Mb
This monograph deals with energy based control of interactive robotic interfaces and the port-Hamiltonian framework is exploited both for modeling and controlling interactive robotic interfaces. Using [...]
Posted: April 8th, 2008, 3:30pm CEST by e-man
Rothbart, Harold ” Cam Design Handbook: Dynamics and Accuracy “
ISBN: 0071377573 | McGraw-Hill | 2003 | PDF | 5.14 mb | 606 pages
In this guide to cam manufacture and design, Rothbart (dean emeritus, College of Science and Engineering,Fairleigh Dickinson University) examines the advantages of cams over other motion devices, describes computer-aided design and manufacturing techniques, [...]
Posted: April 8th, 2008, 3:25pm CEST by e-man
Graham M.L. Gladwell ” Inverse Problems in Vibration (Solid Mechanics and Its Applications) “
springer | English | ISBN: 1402026706 | 457 pages | 2004 | PDF | 2.55 Mb
“This book is a necessary addition to the library of engineers and mathematicians working in vibration theory.”
In the first, 1986, edition of this book, inverse problems in [...]
Posted: April 8th, 2008, 1:33pm CEST by e-man
by Fredrik Gustafsson “Adaptive Filtering and Change Detection “
Wiley | Pages: 510 | 2000-09-07 | ISBN: 0471492876 | DJVU | 3 Mb
Product Description:
Adaptive filtering is a branch of digital signal processing which enables the selective enhancement of desired elements of a signal and the reduction of undesired elements. Change detection is another kind of adaptive [...]
Posted: April 7th, 2008, 2:53pm CEST by e-man
Rudolf F. Graf, William Sheets “Encyclopedia of Electronic Circuits, Vol. 3″
McGraw-Hill/TAB Electronics | 1990-10-01 | ISBN: 0830673482 | 849 pages | PDF | 26,5 Mb
Encyclopedia of Electronic Circuits, Vol. 3
By Rudolf F. Graf, William Sheets
depositfiles.com
easy-share
Share This
Posted: April 7th, 2008, 9:35am CEST by e-man
David Tremayne “The Science of Formula 1 Design: Expert Analysis of the Modern Grand Prix Car ”
J H Haynes & Co Ltd | 15 Jul 2004 | ISBN: 1859609996 | 157 pages | PDF | 146 Mb
F1 journalist David Tremayne unravels the mysteries of modern Grand Prix car design in this all-colour book. Using [...]
Posted: April 7th, 2008, 9:25am CEST by e-man
Qing-Hua Qin “Green’s function and boundary elements of multifield materials ”
Elsevier Science | 2007-07-18 | ISBN: 0080451349 | 266 pages | PDF | 2,3 Mb
Green’s Function and Boundary Elements of Multifield Materials contains a comprehensive treatment of multifield materials under coupled thermal, magnetic, electric, and mechanical loads. Its easy-to-understand text clarifies some of [...]
Posted: April 6th, 2008, 10:16pm CEST by e-man
Jim Winchester ” Boeing 707/720 (Airlife’s Classic Airliners) “
Crowood | 2002 | ISBN: 1840373113 | 128 pages | PDF | 20.8 Mb
The epitomy of commerical jet airliner travel, the Boeing 707 served with all the principal carriers bringing new standards of comfort, speed and efficiency to airline passengers. Pan Am was the first major airline [...]
Posted: April 6th, 2008, 9:39pm CEST by e-man
Jiri Blazek ” Computational Fluid Dynamics: Principles and Applications “
Elsevier Science | ISBN: 0080430090 | 460 pages | 2001 | PDF | 7 Mb
Hardbound. Computational Fluid Dynamics (CFD) is an important design tool in engineering and also a substantial research tool in various physical sciences. The objective of this book is to provide a solid [...]
Posted: April 5th, 2008, 10:58pm CEST by e-man
Keqian Zhang, Dejie Li “Electromagnetic Theory for Microwaves and Optoelectronics”
Springer; 2nd ed. edition (November 12, 2007) | ISBN: 3540742956 | 711 pages | PDF | 19,6 Mb
This book is a first year graduate text on electromagnetic fields and waves. At the same time it serves as a useful reference for researchers and [...]
Posted: April 5th, 2008, 10:54pm CEST by e-man
S L DIXON ” Fluid Mechanics and Thermodynamics of Turbomachinery SI/METRIC “
Butterworth-Heinemann | 320 pages | 1998 | ISBN: 0750670592 | 3.5 MB
Turbomachines are those in which energy is transferred to or from a continuously moving fluid by the motion of a rotating element. Some of the most common and important machines used in engineering [...]
Posted: April 5th, 2008, 10:52pm CEST by e-man
Wei-Wen Yu, “Cold-Formed Steel Design, 3rd Edition”
Publisher: Wiley-Interscience | Number Of Pages: 848 | 2000-06-05 | ISBN: 0471348090 | PDF | 5 MB
The definitive text in the field, thoroughly updated and expanded. Hailed by professionals around the world as the definitive text on the subject, Cold-Formed Steel Design is an indispensable resource for all who [...]
Posted: April 5th, 2008, 10:40pm CEST by e-man
by TARASEISKEY “Power Hybrid Circuit Design and Manufacture (Electrical and Computer Engineering) “Publisher: CRC | Pages: 336 | 1996-05-07 | ISBN: 0824797493 | PDF | 10 MB
Product Description:“Discusses the fundamental design principles, capabilities, and applications of power hybrid microcircuits and modules–detailing the operation of power semiconductor and passive components, the properties of materials, design guidelines, [...]
Posted: April 5th, 2008, 8:44pm CEST by e-man
by Robert D. Zucker”Fundamentals of Gas Dynamics “Publisher: Wiley | Pages: 512 | 2002-07-15 | ISBN: 0471059676 | PDF | 3 MB
Product Description:Provides all necessary equations, tables, and charts as well as self tests.* Included chapters cover reaction propulsion systems and real gas effects.* Written and organized in a manner that makes it accessible for [...]
Posted: April 5th, 2008, 8:42pm CEST by e-man
Dennis R. Moss ” Pressure Vessel Design Manual, Third Edition “Gulf Professional Publishing | 2003 | ISBN: 0750677406 | 499 pages | PDF | 10.3 Mb
…wealth of data presented in the text and appendices….The indexing is thorough and accurate….large graphics and formulae enhance the usefulness….recommended for all academic and research libraries…. This edition defines how [...]
Posted: April 5th, 2008, 8:36pm CEST by e-man
by Lou van der Sluis”Transients in Power Systems”Publisher: Wiley | Pages: 222 | 2001-08-15 | ISBN: 0471486396 | PDF | 2MB
Book Description:Covering the fundamentals of electrical transients, this book will equip readers with the skills to recognise and solve transient problems in power networks and components. Starting with the basics of transient electrical circuit theory, [...]
Posted: April 4th, 2008, 10:59pm CEST by e-man
Ali Emadi, “Energy-Efficient Electric Motors, 3rd Edition”
Publisher: CRC | Number Of Pages: 424 | 2004-08-30 | ISBN: 0824757351 | PDF | 12 MB
This detailed reference provides guidelines for the selection and utilization of electric motors for improved reliability, performance, energy-efficiency, and life-cycle cost. Completely revised and expanded, the book reflects the recent state of [...]
Posted: April 3rd, 2008, 12:20pm CEST by e-man
by I.T. Jolliffe “Principal Component Analysis “
Publisher: Springer | Pages: 502 | 2002-10-01 | ISBN: 0387954422 | PDF | 8 Mb
Book Description:
Principal component analysis is central to the study of multivariate data. Although one of the earliest multivariate techniques it continues to be the subject of much research, ranging from new model- based [...]
Posted: April 2nd, 2008, 2:28pm CEST by e-man
Gary R. Wright, W. Richard Stevens, “The Implementation (TCP/IP Illustrated, Volume 2)”
Publisher: Addison-Wesley Professional | Number Of Pages: 1200 | 1995-02-10 | ISBN: 020163354X | PDF | 28 Mb
Volume 2: The Implementation, contains a thorough explanation of how TCP/IP protocols are implemented. Comprehensive in scope, based on a working standard, and thoroughly illustrated. DLC: TCP/IP [...]
Posted: April 2nd, 2008, 2:27pm CEST by e-man
W. Richard Stevens, “The Protocols (TCP/IP Illustrated, Volume 1)”
Publisher: Addison-Wesley Professional | Number Of Pages: 600 | 1994-01-10 | ISBN: 0201633469 | CHM | 8 MB
TCP/IP Illustrated, Volume 1: The Protocols is an excellent text that provides encyclopedic coverage of the TCP/IP protocol suite. What sets this book apart from others on this subject is [...]
Posted: April 1st, 2008, 1:48pm CEST by e-man
Michael Frankel, “Facility Piping Systems Handbook”
Publisher: McGraw-Hill Professional | Number Of Pages: 1200 | 2001-12-19 | ISBN: 0071358773 | PDF | 11 MB
Plan, select, design, specify, and test entire piping systems
Facility Piping Systems Handbook, Second Edition, gives you a complete design guide and reference for all piping systems, including those in laboratories, and health care [...]
Posted: April 1st, 2008, 1:44pm CEST by e-man
Electrical Power Cable Engineering (Power Engineering) (Power Engineering, 7)
Publisher: CRC | Number Of Pages: 328 | 1998-09-01 | ISBN: 0824799763 | PDF | 12 MB
Provides up-to-date coverage of the design, manufacture, installation, testing, operation, and performance expectations of electric power cables used worldwide—focusing on low- and medium-voltage cables. Discusses basic dielectric theory; conductors; cable characteristics; [...]
